fax (800) 235-7954Static Eliminator for plastic, foam and fiberglass clean up blow off air lines
Typical uses of Ionix Static Eliminators in plastics, fiberglass and composite industries clean up:
Plastic molders and fabricators - An Ionix
Static Eliminator installed in the blow off air line eliminates
static on plastic surface during blow off.
Molded parts release - An Ionix Static Eliminator
installed in the mold release air lines will aid in ejecting small
or light weight parts.
Rotational molding - Blowing out the inside of mold prior to
introduction of resin and colorants with Ionix prevents surface
static which causes uneven distribution of colorant and in turn
color swirl. Ionix used in blowing out complete products dislodges
static plastic particles inside finished product which normal blow
off won't dislodge.
Fiberglass and composites - Ionix installed in the mold air lines
eliminates the static created during the de-molding process.
Ionix is safe to use in hazardous environments.
Click for Ionix HPPL300 and PL300 literature (pdf).
The benefits of using an Ionix Static Eliminators in your
plastic cleanup:
Highly effective - increases the effectiveness of ANY compressed air line by eliminating the static that holds dust to the surface.
Safer to use - No nuclear material, high voltages, or UV radiation to worry about. Safe to use in hazardous environments.
Easy to install at any location - Just install
in any air hose and installation is complete. Click for
Ionix HPPL 300 Installation and Instructions (pdf)
Versatile - Ionix is used in hand blow off as well as in automated blow off lines.
Which model should I order?
The Ionix model you need depends on the pressure you use to blow off
the surface.
All PL300 and HPPL 300 are designed to be installed on 3/8" ID air
hoses.
If you are blowing off the surface at less than 50 psi
and have a separate blow off air line, order our individual
PL300-2.
(Click the underlined model number to be directed to our secure
Yahoo online store.)
Individual PL 300-2 For air hoses up to 50 psi.
If you are blowing off the surface under 50 psi
and also need a hose and gun, order our PL300-2 Kit.
(Click on the underlined model to be directed to our secure Yahoo
store to order)
PL300-2 Kit for air hoses up to 50 psi.
Kit includes PL300-2, 25' air hose with threaded nipple ends, air
gun and 2 hose clamps.
If you are blowing off the surface at more than 50 psi and
less than 150 psi and have a separate blow off air line,
order our individual HPPL300-2.
(Click on the underlined model to be directed to our secure Yahoo
store to order)
Individual HPPL 300-2 for air hoses over 50 psi up to 150 psi.
If you are blowing off the surface at more than 50 psi up
to 150 psi
and also need a hose and gun, order our HPPL 300-2 Kit.
(Click on the underlined model to be directed to our secure Yahoo
store to order)
HPPL300-2
Kit for air hoses over 50 psi up to 150 psi.
Kit includes HPPL300-2, 25' air hose with threaded nipple ends,
air gun and 2 hose clamps.
Guarantee
Our goal is to solve your static problem to your satisfaction.
Ionix is sold with an unconditional 30 day guarantee. You can return
your Ionix within 30 days for any reason. We warrant our product to
be free of defects for 6 months after installation.
How to get started
Call Ionix at 800-246-1784 and we'll be glad to review your
particular problem and determine if an Ionix Static Eliminator will
solve your static issue.
Ionix Static Eliminators are made in the USA with 100% USA
made components.
How Ionix Static Eliminators solve your plastic and
composite clean up problems
Plastic materials are superior electrical insulators. Therefore they
tend to easily create and hold any static electricity charges that
accumulate on their surfaces. You can't practically prevent static
from occurring. All you can do is eliminate those charges at the
production points they cause you a problem.
Simply trying to blow static dust and debris from plastic without a
static eliminator in reality makes your problem worse. Here's why.
There is already static on the plastic surface and debris which is
causing these particles to be electrically attracted to one another.
Compressed air is an electrical insulator. By blowing high volumes
of compressed air over your plastic surfaces, you are essentially
rubbing them with another electrical insulator creating even more
static. The only reason the debris moves off the surface during blow
off is that you've applied an air force against the debris which has
a greater force than the static attraction. That dust you've forced
off will just find another surface to stick to. In reality you've
made your static dust issue worse.
To solve your plastic clean up problem you need to install a
static eliminator in your blow off air hose. When the Ionix
air contacts the plastic part and dust, it dissipates the static
charges holding the debris to the plastic. Not only does the dust
release with less force, it and the plastic surface have their
static charges dissipated and they won't attract other debris.
Additionally, since the blow off air has gone through an Ionix, it
no longer acts like an electrical insulator rubbing on the surface
of the plastic and therefore doesn't create static during blow off
operations..
How to Order -
Call Ionix at 800-246-1784
to order by phone
Go to our secure Yahoo! hosted online store
www.TheIonixStore.com