Ionix Static Eliminators for wood finishing
Ionix is designed to remove static on surfaces and dust prior to finishing. This results in fewer finish blemishes. It also reduces the labor time to prep surfaces for finishing.
Ionix WF200 static eliminator for wood finishing up to 50 psi.
Ionix WF200 static eliminator kit for wood finishing up to 50 psi.
Ionix HPPL 300 static eliminator for wood finishing up to 150 psi.
Ionix HPPL300 static eliminator kit for wood finishing up to 150 psi.
Benefits of Ionix Static Eliminators for wood finishers
Static is created by the friction of any sanding action on a wood surface. Wood is an electrical insulator. The sanding action builds up a static charge on the wood dust and wood surface. They are attracted to each other. When you blow compressed air, which is an electrical insulator, across wood surfaces that are also electrical insulators, you create static on the surface.
Using compressed air to blow off wood surfaces doesn't eliminate any static. It simply suspends the dust in the air and as gravity pulls it down it will be attracted to any static on the wood surface. This causes blemishes in the finish. You MUST use a static eliminator in your blow off line to eliminate this static.
Ionix can also be installed in blow off air lines and in air lines in automated equipment as long as you respect the pressure limitations of the unit.
Ionix is safe to use in hazardous environments.
Simple to unstall
You do not have to use a special hose or air gun to use Ionix. Ionix can be installed anywhere in the blow off air line. Ionix wood finishing units for any standard 3/8" ID hose.
If you have only one air line shared for both blowoff and painting,
when you're ready to blow off the surface, attach the Ionix Static
Eliminator to the end of the air hose. Blow off and then remove the
Ionix Static Eliminator from the air hose and re-attach the paint gun to
the air hose when your ready to paint.
If you have a dedicated air line for blowoff, you can install the Ionix
Static Eliminator at the line drop after the regulator. Ionix does not
need to be at the end of the air line to be effective. The length of the
air hose Ionix is installed on does not diminish its ability to
dissipate static on the surface.
Click on Ionix Static Eliminator WF200 Installation and Instructions to review installation and instructions (PDF format)
How to size Ionix Static Eliminators for wood finishing
There are 2 sizes of Ionix Static Eliminators depending upon the pressure you blow off.
If you blow off UNDER 50 PSI, our WF200-2 is installed on a 3/8" air line.
If you blow off OVER 50 PSI, you would need to use our HPPL300 for 3/8" hose.
These 2 units are avialable as cartridges only to install in existing airlines or as a kit with an Ionix cartridge, 25' of 3/8" threaded hose, air gun and 2 hose clamps. These kits are only available for 3/8" hose.
Guarantee
All Ionix products come with a 30 unconditional guarantee. If you are not satisifed with our product return for a full refund. We have been manufacturing our static eliminators since 1994.
How to order:
You can call us at 800-246-1784 to order by phone.
You can order online through our on line store www.TheIonixStore.com using a credit card or PayPal.