We eliminate static differently

Ionix Static Eliminators for eliminating dust in auto, truck, RV, motorcycle painting

Perfect finishes are the direct result of superior surface preparation before spraying. This is especially true of painting plastic or rubber parts. The surfaces must be free of static to prevent the attraction of airborne dust. Ionix Static Eliminators are safe to use in Class 1 Division 1, Groups C & D Explosion Proof environments.

Redos due to dust are costly in auto/truck/RV/motorcycle painting

It is more cost effective for shops to paint perfectly the first time. Redos cost you money and risk degrading the finish you have worked hard to create. Using an Ionix Static Eliminator will pay for itself in 3 hours! At $33 per hour shop rate, all Ionix has to do is save you 3 hours of rework labor and after that you're making money using the Ionix Static Eliminator!

What causes dust and fisheyes in my paint job?

Static on the surface (which can be caused by many factors too numerous to list here) attracts and holds dust which when painted dries as a "fisheye" or blemish. Blowing compressed air over the surface DOES NOT dissipate the surface static. If fact, the high air velocities of compressed air blowing on a surface an actually make static worse since the friction of the rapidly flowing air over the surface creates surface static. All the compressed air does during blowoff is physically push the static charged dust into the air only to be re-attracted to the surface later. By using an Ionix Static Eliminator during blowoff and tacking, you actually dissipate any static present on the surface and on the dust particles prior to painting so neither the surface or the dust are electrically charged and therefore attracted to each other.

Tacking isn't sufficient to prep surfaces for perfect finishes

Ionix is superior to tacking since tack cloths only pick up loose dust on the surface. The REAL problem is static on the surface to be painted CAUSES dust to be attracted to the surface. Unless you eliminate that surface static, the dust will return after tacking and you will have reworks.

Tacking creates static. Tack cloths have a slight adhesive that causes the dust to stick to the cloth. However, adhesives pulled from or across a surface cause static. You can prove it at your desk. A roll of scotch tape is like a tack cloth. It has an adhesive backing. Quickly pull the tape out of the dispenser and then place your forearm close to the gap where the tape separates from the roll. You can feel the static charge at that gap through the hairs on your forearm if you put them close to the gap. The adhesive pulling from the roll, like a tack cloth across a surface, creates static. So even after you tack, the static created during tacking will attract more dust which appears as fisheyes or blemishes in your paint jobs. Ionix actually eliminates surface static which attracts and holds dust to the surface.

Plus tacking is expensive to do because it uses so much labor time and their cost. Tack cloths retail for about $1 each. If you go through one every 2 days its cheaper to use Ionix! And that doesn't even account for the savings in labor dollars it takes to tack surfaces.

PLUS - you can blow off the car between coats!
Many painters experience dust on the base coat when they're ready to clear coat. With Ionix you can give an additional quick static elimination before the clear coat.

Ionix Static Eliminators are simple to install in paints booths

You do not have to use a special hose or air gun to use Ionix. Ionix Static Eliminators can be installed ANYWHERE in the blowoff air line. Ionix fits standard 3/8" ID air hoses.

If you have only one air line shared for both blowoff and painting, when you're ready to blow off the surface, attach the Ionix Static Eliminator to the end of the air hose. Blowoff and tack and then remove Ionix Static Eliminator from the air hose and attach paint gun to the air hose when your ready to paint.

If you have a dedicated air line for blowoff, you can install the Ionix Static Eliminator at the line drop after the regulator. Ionix does not need to be at the end of the air line to be effective. The length of the air hose Ionix is installed on does not diminish its ability to dissipate static on the surface.

Ionix Static Eliminators for auto painting are simple to use

It's so simple to use that any painter can intuitively understand how to use it. Just blow off as you normally do and Ionix will do the rest of the work!

Which model should I order?

That depends on the type and amount of work you do at your shop.

Our basic shop model - Ionix Model AF200 for shops primarily painting sheet metal  - To be directed to the secure Ionix online store to purchase click AF200 or call 800-246-1784.

Under 50 PSI air hoses
For primarily sheet metal preparation
(Picture shows Ionix AF200-2 with optional 25' hose and air gun)

If you are primarily blowing off a metal surface using pressure under 50 psi, order the AF200. You can also use this model to blow off plastic and rubber parts but it just takes a little longer to eliminate the surface static. Kit includes Ionix model AF200 and 6" of air hose for each end with a thread for a 3/8" quick connect. Note: you can also purchase an optional 25' 3/8" ID air hose and air gun. To be directed to the secure Ionix online store to purchase click AF200-2.

Our professional shop model - Ionix Model PL300-2 for shops primarily painting plastic and rubber parts - To be directed to the secure Ionix online store to purchase click PL300-2..

Under 50 psi air hoses
For shops with the majority of painting being plastic or rubber parts
(Picture shows Ionix PL300-2 with optional 25' hose and air gun)

If a majority of your painting is rubber bumpers or unpainted plastic parts using pressure under 50 psi, consider ordering the Ionix model PL300-2. It's higher static elimination capacity makes blowoff of rubber and plastic parts faster while it is still effective on sheet metal. Note picture shows Ionix Model PL 300-2 with the optional 25' hose and air gun kit. The Ionix model PL300-2 alone does not include the hose and gun kit which you can add to your order.

Our heavy duty model - Ionix Model HPPL300-2 for shops primarily using high pressure air lines for surface prep - To be directed to the secure Ionix online store to purchase click HPPL300-2.

Over 50 psi to 150 psi air hoses
Equally effective on sheet metal, plastic and rubber parts
(Picture shows Ionix HPPL300 with optional 25' hose and air gun)

If you are blowing off any surface at pressures exceeding 50 psi (up to 150psi) you must use our high pressure model HPPL300-2. Effective on sheet metal, plastic or rubber parts. Note picture shows Ionix Model HPPL 300-2 with the optional 25' hose and air gun kit. The Ionix model HPPL300-2 alone does not include the hose and gun kit which you can add to your order.

30 day satisfaction guarantee!

Use Ionix for 30 days. If your not completely satisfied with your Ionix Static Eliminator, you can return it IN ANY CONDITION for a full and complete refund. Our goal is to solve your static problem to your satisfaction. We warrant our product to be free of defects for 6 months after installation. Replacement is recommended after one year of actual use. Ionix Static Eliminators for the auto body repair market have been sold for over 5 years through quality auto body suppliers like Auto Body Toolmart, Collision Services and AutoBodyStore.com.


Call 800-246-1784 or go to our web site www.IonixTechnologies.com or email us at info@ionixtechnologies.com

How to Order

Call Ionix at 800-246-1784
to order by phone


Go to our secure Yahoo!
hosted online store

  Ionix Technologies
PO Box 6228 - Boca Raton FL 33427
Tel: 561-955-8534 (North America toll free - 800-246-1784)
email: info@ionixtechnologies.com